SE20025W0

More diodes, closer together – no dark spots

• A higher number of diodes per flexible strip means there are minimal dark spots. This provides a nicer finish when used on a plinth in a room with a glossy floor finish or in an aluminium profile.
• Self-adhesive 3M tape backing allows for quick and simple installation.
• Male and female ends on the strip allow you to create the length required.
• The strip can be cut to length, scissor marks on the product mark where it’s suitable to cut (every 65mm).
• Re-use a cut section of the strip ONCE using the mini-cut connector (SE90317HD).
• Use this product for a variety of applications (on the plinth, on the underside of the bed, above cabinets/wardrobes to up-light the ceiling to name a few).
• All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips and a LED driver.
• Run 8m from one 50W driver (an extra 1.34m than the Vega).
• Starter kits include a 15W driver and driver connection lead.